1.The hydraulic mobile lighting Tower engine does not start
First check whether there is fuel in the tank? If not, please add fuel,
Check whether the engine switch is on? If not, turn on the engine switch.
Check whether the oil is sufficient? If it is not enough, add oil.
Check whether the spark plug is in good condition? If not, clean and adjust the spark plug and replace it. If necessary, replace the spark plug. (This operation is not available for diesel engines)
If it still does not start, inform the company. It is maintained by professional technicians of the company.
2. The hydraulic mobile lighting Tower has no voltage output
First, check whether the AC circuit breaker is connected? If not, turn on the AC circuit breaker.
Check whether the load appliance is faulty. In case of failure, replace the equipment or repair it.
If there is still no voltage output, inform the company. It is maintained by professional technicians of the company.
3. During all abnormal lighting of the hydraulic mast light tower, the generator shall be stopped when the lighting tower is operated or inspected or repaired
W
Stop the generator before measuring the circuit.
Stop the generator before changing the lamp.
Change the rectifier and stop the generator.
Pay special attention to the following problems before repairing circuit problems.
The frame and crossbar should be well grounded. It is assumed that all conductors are hot.
Carry out the operation according to the single circuit of the system, one step at a time. Before disconnecting the rectifier, disconnect the main control switch, wait for 30 seconds, and then fully check the wires and connections.
